загрузка...

PassMark BurnInTest Pro 8.1 Build 1024 Final + ключ (2017) ENG

Автор: skaizex от 11-08-2017, 08:05

0
PassMark BurnInTest Pro 8.1 Build 1024 Final + ключ (2017) ENG

BurnInTest Pro

BurnInTest Pro - профессиональная версия программы для всестороннего и детального тестирования компонентов компьютера. Утилита тестирует скорость процессора, оперативную память, жесткие диски, CD/DVD приводы, звуковые карты, видеокарты, принтеры, сетевые соединения. Также может проводить тестирование последовательных (до 12 портов одновременно) и параллельных портов, портов USB (до 10 портов одновременно). Также в профессиональной версии имеются дополнительные параметры тестирования процессоров и видеокарт. После тестирования программа выдает отчет с найденными ошибками и нестабильностями.

Также в профессиональной версии имеются дополнительные параметры тестирования процессоров и видеокарт. После тестирования программа выдает отчет с найденными ошибками и нестабильностями. Идеально подходит для любителей разгона. Тестирование ЦПУ, жестких дисков, CD ROM, программ записи на СD, двумерной графики, трехмерной графики, памяти, сетевого подключения, последовательные порты, параллельные порты, USB порты, устройства записи, видео воспроизведения, принтера или тестирование разработанных клиентом плагинов, которые могут быть проверены одновременно. Результаты могут быть сохранены на жесткий диск, распечатаны или экспортированы в качестве графического изображения.

BurnInTest Pro также позволяет тестировать последовательные, параллельные, и USB устройства и имеет расширенную онлайн поддержку. Также имеются функции EMC тестирования для ANSI C63.4-1992, RAM проверки до 64 Гб и циклической перезагрузки. Надежда социума на компьютер может повлиять на большие затраты при крахе системы. Также проверяет оборудование компьютера за короткий период времени, так что скрытые и неизвестные проблемы находятся перед тем, как они обычно встречаются. Программа подходит для компьютерных энтузиастов, производителей оборудования, системных исследователей и «ускорителей», которые хотят выжать максимум из своей системы. Идеально подходит для любителей разгона.

PassMark BurnInTest Pro 8.1 Build 1024 Final + ключ (2017) ENG PassMark BurnInTest Pro 8.1 Build 1024 Final + ключ (2017) ENG


Version 8.1 build 1014, 22/April/2016
* PCIe test changed to be compatible with PCIe firmware version 2.0.1000.0. PCIe cards with older firmware version will need to use an older build of BurnInTest or have their firmware updated
* Changed a GPGPU error to show an error code where available
* Added unique error message when failing to play back MP3 file for sine wave tone in 2D reference test pattern
* Fixed a crash in the 2D EMC - scrolling characters test when there were more than 4 monitors connected to a system (test still only supports 4 monitors)
* Fixed a bug when using the plugin option "Ignore no operations" with pre-test plugins could see a "no operations" error still occur during the normal test phase (after the pre test plugins had finished)
* Changed text box contents on pass/fail window to pass or fail to assist automated scripting programs getting the result
* Filtered out Microsoft virtual adapters "Microsoft Hosted Network Virtual Adapter" and "Microsoft Wi-Fi Direct Virtual Adapter" from network test
* Fixed a bug when the webcam test was used in a script that would prematurely end the main tests

What's new in version 8.1 Build 1015:
* Now filtering "Bluetooth" named network cards from "All available ethernet" and "All available 802.11" network test options
* Now filtering "Microsoft Virtual" adapters from all network test options to ignore "Microsoft Virtual WiFi Miniport Adapter" and "Microsoft Virtual WiFi Miniport Adapter"
* Removed whitespace padding in some HTML output
* Fixed a bug with management console initial connect not sending all the system information sometimes
* Updated system information library, fixes a bug that was preventing some NVMe hard drive temperatures from being read

Release 8.1 build 1016 - 20 June 2016
- Added a benchmark test phase for USB3 as part of the test
- Added USB3 low level error reporting to the trace level log
- Added new error message to 2D test when EMC + test pattern test is selected and only 1 monitor is present
- Added OBEX FTP transfer type to bluetooth test
- Made some changes to disk test to skip butterfly test when running Cylic pattern and an SSD is detected
- Now filtering "Bluetooth" named network cards from "All available ethernet" and "All available 802.11" network test options
- Added "Microsoft Virtual" to list of filtered out adapter form network test to account for "Microsoft Virtual WiFi Miniport Adapter" and "Microsoft Virtual WiFi Miniport Adapter"
- Fixed a bug where the advanced net test window was not updating the statistics when running the test on a teamed group of network cards. Sent/Recv is now displayed but load and load balancing is not available (missing performance counters).
- Fixed a bug with management console inital connect not sending all the system information across
- Removed whitespace padding in some HTML output

Version 8.1 build 1017, 21/July/2016
* Fixed a bug where the USB error count could be reset during a test cycle
* Fixed a bug when scripting multiple reboots was not always processing each reboot correctly
* Changed the "Butterfly test skipped" warning message to information level so it is logged but not counted as a warning
* Changed the default sample period for temperature collection to 10 seconds (from 1 second). This can prevent crashes on some systems where frequent temperature polling can cause a device driver crash.

Release 8.1 build 1018 - 8 August 2016
- Fixed a bug with detecting and starting serial port tests when running in WinPE on some systems
- Changed the behaviour of the raw disk test when running in WinPE to be the same as running in a full version of Windows, now the RAW disk test will run on a disk that contains partitions unless there are windows files detected.
- Fixed a possible long wait for system information sometimes when launching BurnInTest

Release 8.1 build 1019 - 25 October 2016
- Now properly signalling a manual stop to the script so post test actions will be followed correctly, previously all stops during a script were treated as "Automatic"
- Fixed a bug when USB3 plug fails benchmark mode in USB high-speed mode, this could cause an error if using the USB3 plugs on a USB2 port when the test switched from benchmark to loopback
- Reduced the amount of time the 2D test will wait between tests when on a low duty cycles
- Fixed a window redraw issue where the 2D lines and bitmaps test was not always updating correctly after the lines test on some systems
- Fixed some display issues (wrong hard drive letter shown) sometime when a test config was created from default or moved between system with different disk setups

Release 8.1 build 1020 - 23 December 2016
- Changed "Operating system" in the HTML customer certificate to "Test operating system" and will only print customer and technician fields if they are filled in
- Enabled 8b/10b error reporting in USB3 test
- Made some changes to better track when USB3 devices are connected or disconnected (eg forced disconnection by error) during testing
- Fixed a possible 32bit overflow error when displaying the sent and received byte count for USB3 test operations
- Fixed a USB3 issue when device is enumerated due to high number of link layer errors (more than 64 link layer errors per 100msec)
- Fixed a bug in USB2 test where inbuffer/outbuffer was overwritten by IOCTL_EZUSB_GET_LAST_ERROR after read/write failure which caused some trace logging inconsistencies
- Fixed a scripting bug where numbers with decimal points were not being parsed correctly (like disk test file size)

Release 8.1 build 1021 - 17 March 2017
- Added syncronization to the USB3 test threads (plugs begin with benchmark read, when all plugs finished the benchmark read test, they will start benchmark write, and then loopback test)
- USB3 test threads will wait for all plugs to enumerate and get ready before beginning loopback and benchmark tests
- Increased USB3 plug reenumeration timeout from 5 to 10 seconds
- Added "Ignore USB recoverable failures" to the USB configuration tab

Release 8.1 build 1022 - 3 April 2017
- Applied USB Timeout set in USB preferences to USB3 benchmark test
- Fixed a missing default config file error message at startup
- Fixed a crash that could occur during system information collection in 32bit
- Fixed a bug causing a manual stop to be treated as automatic when running a script and using the toolbar stop button

Release 8.1 build 1023 - 20 July 2017
- Fixed a logging bug where errors logged against physical disks with numbers > 9 would not show both digits in the log message
- Fixed a possible crash in during close/cleanup when the management console was enabled
- Fixed a problem with management console preferences not allowing https addresses to be entered
- Fixed a display bug where the drive letter displayed in the HTML logs could not match the display
- Fixed an issue when reading system information (SMBIOS information such as BIOS version) on UEFI only systems
- Made some changes in the network test to fix an overflow that could coccur in the max delay timing calculation which could show a max delay higher than the current timeout value when no error occured.

Release 8.1 build 1024 - 11 August 2017
- Changed PassMark web links from HTTP to HTTPS
- Updated system information library with some changes;
* Added temperature offsets for Ryzen ThreadRipper chipsets
* Added support for obtaining CPU info for Skylake-X chipset
* Fixed bug with measuring base/turbo speeds
* Fixed a bug where temperature average was not calculated for systems with multiple CPUs

Информация о программе:
Год релиза: 2017
Название софта: PassMark BurnInTest Pro 8.1 Build 1024 Final
Платформа/OC: Windows® 10/8/8.1/XP/Vista/7
Язык интерфейса: Английский
Активация: key-DVT
Размер файла: 26.32 MB

PassMark BurnInTest Pro 8.1 Build 1024 Final + ключ (2017) ENG

PassMark BurnInTest Pro 8.1 Build 1024 Final + ключ (2017) ENG PassMark BurnInTest Pro 8.1 Build 1024 Final + ключ (2017) ENGPassMark BurnInTest Pro 8.1 Build 1024 Final + ключ (2017) ENG
загрузка...

Изменил: skaizex по причине: новая версия

Категория: Софт|Soft / Система|Утилиты


Уважаемый посетитель, Вы зашли на сайт как незарегистрированный пользователь.
Мы рекомендуем Вам зарегистрироваться либо войти на сайт под своим именем.
Информация
Посетители, находящиеся в группе Гости, не могут оставлять комментарии к данной публикации.
загрузка...