PassMark BurnInTest Pro 9.0 Build 1010 Final + ключ (2018) ENG

Автор: skaizex от 9-08-2018, 07:39

0
PassMark BurnInTest Pro 9.0 Build 1010 Final + ключ (2018) ENG

BurnInTest Pro

BurnInTest Pro - профессиональная версия программы для всестороннего и детального тестирования компонентов компьютера. Утилита тестирует скорость процессора, оперативную память, жесткие диски, CD/DVD приводы, звуковые карты, видеокарты, принтеры, сетевые соединения. Также может проводить тестирование последовательных (до 12 портов одновременно) и параллельных портов, портов USB (до 10 портов одновременно). Также в профессиональной версии имеются дополнительные параметры тестирования процессоров и видеокарт. После тестирования программа выдает отчет с найденными ошибками и нестабильностями.

Также в профессиональной версии имеются дополнительные параметры тестирования процессоров и видеокарт. После тестирования программа выдает отчет с найденными ошибками и нестабильностями. Идеально подходит для любителей разгона. Тестирование ЦПУ, жестких дисков, CD ROM, программ записи на СD, двумерной графики, трехмерной графики, памяти, сетевого подключения, последовательные порты, параллельные порты, USB порты, устройства записи, видео воспроизведения, принтера или тестирование разработанных клиентом плагинов, которые могут быть проверены одновременно. Результаты могут быть сохранены на жесткий диск, распечатаны или экспортированы в качестве графического изображения.

BurnInTest Pro также позволяет тестировать последовательные, параллельные, и USB устройства и имеет расширенную онлайн поддержку. Также имеются функции EMC тестирования для ANSI C63.4-1992, RAM проверки до 64 Гб и циклической перезагрузки. Надежда социума на компьютер может повлиять на большие затраты при крахе системы. Также проверяет оборудование компьютера за короткий период времени, так что скрытые и неизвестные проблемы находятся перед тем, как они обычно встречаются. Программа подходит для компьютерных энтузиастов, производителей оборудования, системных исследователей и «ускорителей», которые хотят выжать максимум из своей системы. Идеально подходит для любителей разгона.

PassMark BurnInTest Pro 9.0 Build 1010 Final + ключ (2018) ENG PassMark BurnInTest Pro 9.0 Build 1010 Final + ключ (2018) ENG


Release 8.1 build 1021 - 17 March 2017
- Added syncronization to the USB3 test threads (plugs begin with benchmark read, when all plugs finished the benchmark read test, they will start benchmark write, and then loopback test)
- USB3 test threads will wait for all plugs to enumerate and get ready before beginning loopback and benchmark tests
- Increased USB3 plug reenumeration timeout from 5 to 10 seconds
- Added "Ignore USB recoverable failures" to the USB configuration tab

Release 8.1 build 1022 - 3 April 2017
- Applied USB Timeout set in USB preferences to USB3 benchmark test
- Fixed a missing default config file error message at startup
- Fixed a crash that could occur during system information collection in 32bit
- Fixed a bug causing a manual stop to be treated as automatic when running a script and using the toolbar stop button

Release 8.1 build 1023 - 20 July 2017
- Fixed a logging bug where errors logged against physical disks with numbers > 9 would not show both digits in the log message
- Fixed a possible crash in during close/cleanup when the management console was enabled
- Fixed a problem with management console preferences not allowing https addresses to be entered
- Fixed a display bug where the drive letter displayed in the HTML logs could not match the display
- Fixed an issue when reading system information (SMBIOS information such as BIOS version) on UEFI only systems
- Made some changes in the network test to fix an overflow that could coccur in the max delay timing calculation which could show a max delay higher than the current timeout value when no error occured.

Release 8.1 build 1024 - 11 August 2017
- Changed PassMark web links from HTTP to HTTPS
- Updated system information library with some changes;
* Added temperature offsets for Ryzen ThreadRipper chipsets
* Added support for obtaining CPU info for Skylake-X chipset
* Fixed bug with measuring base/turbo speeds
* Fixed a bug where temperature average was not calculated for systems with multiple CPUs

Release 9 build 1002 - 20th March 2018
- Fixed a bug with "Install to usb" function not copying the required DX12 3D test media files
- Fixed a bug where if all tests had finished (eg in an error condition) before clicking stop button then BurnInTest could get stuck and not allow tests to be stopped properly

What's new in version 9.0 Build 1003:
* Changes to the PCIe test for handling sleep states during testing
* Fixed a bug that could cause tests to end before their set runtime

What's new in version 9.0 Build 1004:
* Fixed a bug with the DX12 test losing it's operations and cycle count after 15mins
* Fixed a possible "No operations" error for the DX12 test
* Fixed a bug with Advanced network, PCIE and serial port tests not updating operations count when dashboard tab was not displayed, which could cause a "No operations detected" error message.

What's new in version 9.0 Build 1006:
- Changed behaviour so when using a script from the command line the management console connection is delayed until a config (with the management console enabled) is loaded or the SETMANAGEMENT script option is used
- Fixed a crash that could occur when turning on the management console option using a script
- Removed IP information for network cards from test certificate
- Install to USB, added window message updates when copying big files to prevent "Window not responding"
- Install to USB, added LasUsed.bitcfg file to USB drive during copy process
- Fixed a 32bit overflow when logging the offset location of an error in the Optical test that could cause negative values to be displayed for large files
- Added an error message when the DX12 test executable is missing / fails to launch
- Fixed the display of the number of USB tests running on the test progress tile (previously showing an incorrect number of tests running).
- Temperature graphing, added checks and fixes for graphing more than the maximum # of temperature sources (32)
- Fixed a bug where selecting "No Monitoring" for temperature monitoring in test preferences could lead to a crash

Release 9.0 build 1007 - 29th June 2018
- Made some changes to the advanced network test in order to run a bit slower and allow smaller target speeds on low speed network cards
- Fixed some display issues with the advanced network test dashboard tile view
- Updated system information library to fix some issues when reading Intel SSD temperatures
- Added some extra TPM error messages
- Fixed an issue with the PHYSDISK command line parameter and the auto select disks setting when running in WinPE not correctly selecting all the physical disks
- Fixed a bug where if just a pre test was selected (eg the TPM test) then it was possible for the test run to not stop correctly after the pre test was finished.
- Fixed a minor bug in calculation of the Cycle in the USB3 test
- Changed the packet count per cycle of the USB3 test to 115,000 to bring the cycle count more into line with the USB2 cycle count

What's new in version 9.0 Build 1009:
* Fixed a bug where if a machine ID was specified on the command line using -MGT and there was no previous one already generated (or machineid.dat file present) then it was ignored and a new one generated on connection to the management console
* Fixed some uninitialized variables when sending data to the management console
* Started encoding XML invalid characters when sending system information to the management console
* Made some changes to prevent invalid characters being used in the management console machine ID

What's new in version 9.0 Build 1010:
* Fixed a bug in the 2D colour bar test that was preventing the main BurnInTest windows from handling messages (eg when clicking the stop button) which made it impossible to stop the test.
* Removed the verified operations count for the GPGPU as it was unused, added an error count to the dashboard tile
* Fixed a bug preventing bitaccess.txt from correctly working with the test selections, times and cycles on the dashboard display
* Fixed a bug preventing bitaccess.txt working with the TPM test
* Made some changes so invalid filename characters are stripped from the log file prefix name when using system variables replacements

Информация о программе:
Год релиза: 2018
Название софта: PassMark BurnInTest Pro 9.0 Build 1010 Final
Платформа/OC: Windows® 10/8/8.1/7/Vista/XP SP3/Server 2012 R2/2008 R2/2003/2000 (x64)
Язык интерфейса: Английский
Активация: patch-astron
Размер файла: 48.00 MB

PassMark BurnInTest Pro 9.0 Build 1010 Final + ключ (2018) ENG

PassMark BurnInTest Pro 9.0 Build 1010 Final + ключ (2018) ENGPassMark BurnInTest Pro 9.0 Build 1010 Final + ключ (2018) ENG PassMark BurnInTest Pro 9.0 Build 1010 Final + ключ (2018) ENG

Изменил: skaizex по причине: новая версия

Категория: Софт|Soft / Система|Утилиты


Уважаемый посетитель, Вы зашли на сайт как незарегистрированный пользователь.
Мы рекомендуем Вам зарегистрироваться либо войти на сайт под своим именем.
Информация
Посетители, находящиеся в группе Гости, не могут оставлять комментарии к данной публикации.