» » » Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]

 

Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]

Автор: skaizex от 23-04-2020, 22:38

2
Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]

Macrium Reflect Professional

Macrium Reflect Professional - это специализированная программа, которая поможет создавать и восстанавливать образы жёсткого диска и резервных данных. Утилита создаёт образ Windows во время её использования и не требует обязательной перезагрузки компьютера или других дополнительных манипуляций. Кроме того, можно просматривать образ диска и планировать бэкап. Программа имеет большую скорость создания образа диска. Образ размером в 12 Gb данных будет смонтирован всего за пятнадцать минут. При этом размер сжатого бэкапа будет всего 8 Gb. Избыточные и полные образы дисков могут быть восстановлены и смонтированы в качестве виртуальных дисков в Проводнике Windows.

Возможности программы:
• Создание образа как всего диска, так и отдельных папок и файлов;
• Выбор места хранения готового образа (на локальном жестком диске, на сетевом диске или оптическом носителе);
• Создание образа системы "на лету" без перезагрузки Windows;
• Встроенный планировщик резервирования данных;
• Создание загрузочного диска, используя Linux или BartPE;
• Верификация готовых образов;
• Использование сервиса копирования Microsoft Volume Shadow (VSS);
• Высокая скорость работы и степень сжатия;
• Обеспечение безопасности с использованием AES 256-битного шифрования;
• Возможность пакетной записи на CD/DVD.

Drives Supported:
IDE, SATA, SCSI, USB, IEEE 1394 (FireWire)

CD DVD Formats:
CD-R, CD-RW, DVD-R, DVD-RW, DVD R, DVD RW, DVD-R DL, DVD R DL

Filesystems supported:
• NTFS (All versions)
• FAT16
• FAT32
• Ext2/3FS

What's new in Macrium Reflect 6:

Rapid Delta Restore (RDR)
Using advanced delta detection technology RDR can rapidly recover data from single, or multiple full backups. Cuts restore times by 90% or more.

Pre-defined backup plan templates
The Macrium Reflect scheduling engine is pre-loaded with templates for traditional, Incremental forever, or you can create your own custom plan.

Incrementals forever
An efficient method to continuously maintain a defined number of the most recent incremental backups. The oldest incremental files are consolidated into a single synthetic delta.

SSD Trim support
This features provides automated SSD optimization providing enhanced SSD performance and longevity.

Rapid Delta Clone (RDC)
Improving further on the cloning capabilities using technology based on RDR to speed up disk cloning activities by 90% or more.

GFS with backup chain protection
The traditional GFS backup template has been pre-configured with monthly, weekly, daily activities, and retention rules. Simplifies management of backup chains.

Custom backup plan support
Allows administrators the flexibility of creating custom backup plans that provide the level of protection they require.

Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]


Bug fixes and Improvements v7.2.4523 - 29th October 2019

XP Boot Menu
Windows XP can now handle boot menu creation when the ''C:'' drive has the compressed attribute set.
Auto System restore
A "Backup is running" message box could be incorrectly shown on Windows Vista when performing an automatic restore. This has been resolved.
SQL Continuous backup
The Start end End time calculations didn''t take into account the local time zone. This has been resolved.
Rescue Media Builder
·On multi-boot systems, Windows RE WIM files for a different architecture to the current OS will now be ignored when scanning.
·When building rescue media with a custom wim for a different architecture to the running OS (eg. a 32-bit custom wim on a 64-bit system), RMBuilder will now detect the architecture mismatch and will not try to copy drivers from the host OS.
·On Windows Vista, RMBuilder would sometimes give "WIM file not found" error messages when a valid Wim file was present. This has been resolved.
·Since Windows PE does not support wifi, Windows PE rescue media will no longer give Unsupported Devices messages for wifi devices.
·In certain cases, 64-bit drivers could be automatically copied into the 32-bit drivers folder. This has been resolved.
·USB root hubs will now be shown in the list of devices on RMBuilder''s Devices And Drivers options tab.
·If the Windows ADK is installed but a newer version of Windows PE is available from a zip file, RMBuilder will now build rescue media from the zip file wim rather than the ADK wim..
·When performing an automatic restore on a system with multiple network adapters, the rescue media would sometimes not correctly set the network configuration for all adapters. This has been resolved.
·USB Devices in RMBuilder now show the volume label as well as the drive letter.
The ''Backup Selection'' dialog in Reflect and the ''Update Drivers'' dialog in RMBuilder have been updated to allow for easier browsing for network folders.
7.2.4711
Delta Index Saving Efficiency
We''ve improved the efficiency of saving Incrementals with large delta indexes.
Technicians USB
We''ve enabled the Technicians USB stick and ISO to run the portable version of Reflect on Windows Hyper-V and Server Core OS''s.
Phantom partitions on GPT Disks
A corrupt GPT partition table on disk could cause Reflect to display ''phantom'' disk partitons. This has been resolved.
Standalone Consolidation
Using the Standalone Consolidation tool, consolidate.exe, to consolidate Incrementals where an existing consolidated Inc is between the ''From'' and ''To'' Inc, could cause Reflect to erroneously try to locate a previously consolidated file when the backup set was opened. This has been resolved.
File and Folder
If a File and Folder backup definition included multiple root paths for the same drive but the drive letter was specified in both upper and lower case (eg, ''D:\Data\1'' & ''d:\Data\2'') then the backed up paths could be erroneously split at ''D:'' & ''d:'' when mounting the backup in Windows Explorer. This has been resoloved
Alternative locations
Using ''Alternative locations'' for a backup could break the ''Enforce an entered image or File and Folder backup file name'' option in the global defaults. This has been resoloved
7.2.4732
• Error: ''Error reading Image file''
Some customers have received ''Error reading Image file'' when creating Delta Incremental Images. This has been resolved.
We recommend re-building your rescue media if currently built with v7.2.4711 to ensure compatibility with your backup sets.
• Volume detection
Reflect would fail to recognise file systems formatted on Dynamic volumes spanning disks with 4K sector sizes. This has been resolved.
• Rescue Media Builder
- This release resolves a problem starting the rescue environment from the recovery boot created menu with v7.2.4711.
Note: Running either this full installer or patch will automatically correct the current boot menu. If you continue to have problems then please launch RMBuilder and remove/re-add the boot menu.
- Moving the PE staging files to a different drive would result in duplication of the boot\Macrium sub folder. This has been resolved.
Note: If a corrupt PE staging folder structure is detected by RMBuilder then it will be automatically deleted.
7.2.4808
• При открытии диалогового окна проверки может возникнуть исключение программы. Этот вопрос уже решен.
• Macrium Change Block Tracker (MRCBT)
* CBT может ошибочно зависать на блокировках томов в некоторых системах, вызывая проблемы с планированием событий системного тома chkdsk, выталкиванием USB-накопителя и персональным хранилищем OneDrive. Этот вопрос уже решен.

Информация о программе:
Год релиза: 2020
Название софта: Macrium Reflect Workstation / Server / Server Plus
Платформа/OC: Windows® 10/8/8.1/7 (64-bit only)
Язык интерфейса: Английский
Активация: patch-MPT
Размер файла: 340.00 MB

Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]

Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]Macrium Reflect 7.2.4859 Workstation / Server / Server Plus + patch [На английском]

Категория: Софт|Soft / Система|Утилиты


Уважаемый посетитель, Вы зашли на сайт как незарегистрированный пользователь.
Мы рекомендуем Вам зарегистрироваться либо войти на сайт под своим именем.
<
  • Нравится
  • 0
  • Публикаций: 997
  • Комментариев: 41
  • ICQ:
12 марта 2017 12:23

skaizex

  • Группа: Главные редакторы
  • Регистрация: 19.02.2013
 
Цитата: Phoenixx
Патч не работает - пишет неизвестный тип файла

Проверял на 7/10, всё работало безупречно.

<
  • Нравится
  • 0
  • Публикаций: 0
  • Комментариев: 1
  • ICQ:
12 марта 2017 05:42

Phoenixx

  • Группа: Посетители
  • Регистрация: 12.03.2017
 
Патч не работает - пишет неизвестный тип файла

Информация
Посетители, находящиеся в группе Гости, не могут оставлять комментарии к данной публикации.